Zhangjiagang City Stelle Coating Equipment Co.,Ltd.
Zhangjiagang City Stelle Coating Equipment Co.,Ltd. Surface Challenge Expert We Make Your Toughest Preparation Easy !!!
Add to Cart
Automatic Small Workpieces Tracked Type Sand Blasting Machine for Remove Scratches and Improve Surface Roughness
Product Description
The machine adopts wind recovery abrasive. The separator is arranged on the side of the dust box. After the abrasive is sprayed from the spray gun, it is separated by the main machine returning sand tube and the high-efficiency separator, and then returned to the separator storage tank for recycling, and the separated dust and spray. The dust generated in the sand processing is sucked away by the dust box.
Main technical parameters
|
Model
|
STR-LD
|
|
Air end shape dimensions
|
L1140×W1000×H1860mm
|
|
Roller size
|
500×600mm
|
|
Every processing capacity
|
30-50kg
|
|
Roller motor
|
50HZ ac 380V 3-11KW
|
|
Roller speed
|
10RPM
|
|
Separator moto
|
380V 50HZ 3KW
|
|
Air source requirement
|
pressure 2-7 kg/cm2
|
|
Gas consumption
|
1m3/min
|
Application
1. Size of the sand blasting machine (length × width × height): 1300 × 1830 × 2250mm
2. Track drive motor power: 2.2Kw
3. Swing motor power: 0.75Kw
4, dust removal fan power: 4Kw
5, the total power of the equipment is about: 7Kw
6. The total air consumption of the equipment is about: greater than 6m3/min (0.7Mpa) (customer-supplied)
7, power requirements: 380V ± 10V 50Hz
Working principle: using compressed air as the power, driving the abrasive to accelerate on the surface of the workpiece after being accelerated by the spray gun, removing burrs and rust on the surface of the workpiece, thereby cleaning the surface of the workpiece, optimizing the performance of the workpiece, and obtaining the best surface treatment effect of the workpiece. .