Portable Tracked Type Sandblasting Machine / Automated Sandblasting Equipment

Roller Track Type Automatic Tracked Type Sand Blasting Machine for Rust Removal of Parts Internal and External Surface

Product Description

​This equipment is mainly composed of sand blasting machine, track rotating mechanism, high efficiency separator, dust removal system, electrical control system, compressed air (customer-supplied) and so on.

Main technical parameters

Application

1. Size of the sand blasting machine (length × width × height): 1300 × 1300 × 2000mm
2, the maximum processing workpiece specifications (diameter × height):
3, track drive motor power: 1.5Kw
4, dust removal fan power: 4Kw
5, the total power of the equipment is about: 5.5Kw
6. The total air consumption of the equipment is about: greater than 6m3/min (0.7Mpa)

1, sandblasting host
The main body is welded by a 3mm thick carbon steel plate, and the inner and outer surfaces of the engine room are painted.
There is a vent at the back;
2. Track rotation mechanism
The track rotation mechanism is driven by a reducer, and the power of the reduction motor is 1.5Kw;
This machine is equipped with 6 high-efficiency spray guns, which are made of high wear-resistant boron carbide material. Specifications: φ8*φ20*60.
3, high-efficiency separator
The separator is an important part of the equipment, which can effectively separate the good abrasive and dust, and ensure the abrasive loss can be saved under the premise of efficient processing of the workpiece.
If the separation effect of the separator is not good, it will affect the processing efficiency of the equipment and affect the dust removal effect of the whole machine.
4, dust removal system
The dust removal system consists of a filter element, a pulse backflushing, a body, a dust collecting bucket, and a dust removing fan.